Enphase IQ8M-72-M-US Microinverter

The new IQ8M-72-2-US Microinverters are the industry’s first microgrid-forming, softwaredefined microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is our proprietary application-specific integrated circuit (ASIC) which enables the microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced 55nm technology with high speed digital logic and has super-fast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems.

 

• Manufacturer: Enphase Energy
  Product Line: IQ8 Series
  Model ID: IQ8M-72-2-US

• Mechanical Data
  
  Technology: Micro-Inverter
  Dimensions:
  8.3 x 6.9 x 1.2 Inches
  Weight: 2.38 lbs
  Connector Type: MC4
  Cooling: Natural convection - No Fans
  Approved for Wet Locations: Yes
  Enclosure: Class II Double-Insulated, Corrosion Resistant Polymeric Enclosure

• Electrical Data
  
  Input Data
  Commonly Used Module Pairings: 260W to 460W+
  Module Compatibility: 60 Cell/120 Half Cell and 72 Cell/144 Half Cell PV Modules
  Peak Power Tracking Voltage: 33V-45 Volts
  Operating Range: 25V-48 Volts
  Min / Max Start Voltage: 30V / 58 Volts
  Max. Input DC Voltage: 60 Volts
  Max DC Short Circuit Current (Module Isc): 15 Amps
  Overvoltage Class DC Port: II
  DC Port Backfeed Under Single Fault: 0 Amps
  PV Array Configuration: 1x1 Ungrounded Array; No additional DC side production required; AC side protection requires max 20A per branch circuit
  Output Data (AC)
  Peak Output Power: 330 VA
  Maximum Continuous Output Power: 325 VA
  Nominal Voltage / Range: 240V / 211-264V
  Nominal Output Current: 1.45 Amps
  Nominal Frequency: 60 Hz
  Extended Frequency Range: 50-58 Hz
  Peak Efficiency: 97.6%

25 Year Limited Warranty

 

Enphase Energy IQ8A and IQ8M Specs

Enphase Energy IQ8 Installation

Enphase Energy Warranty